welded mesh
Product Details:
| Place of Origin | Tianjin, China (Mainland) |
|---|---|
| Brand Name | UAN |
| Model Number | uan 200 |
| Material | Low-Carbon Iron Wire |
| Type | Welded Mesh |
| Application | Construction Wire Mesh |
| Hole Shape | Square |
Payment & Shipping Terms:
| Minimum Order Quantity: | 66 Cubic Meter one container |
|---|---|
| Packaging Details: | put in the case made by angle iron. |
| Delivery Time: | 7 days |
| Payment Terms: | L/C,D/A,D/P,T/T |
| Supply Ability: | 40 Ton per Day |
Detailed Product Description
Introduction to welding mesh
Welded steel wire mesh made from low carbon steel wire rods, which undergo a cold-rolling and straightening process, and then arranged vertically in proper spacing in the welding equipment both at line wires and at cross wires ,and joint together by mean of electric resistance spot-welding(also directly welded with hot-rolled wire rods ), turning into steel fabric mesh sheets.
The welded steel mesh has the following advantages over the reinforcing steel bar bundled by hand:
1.Insurance of Project Quality: great hardness, good elasticity, uniformity spacing, high welding strength, hard to deform by trample, easy to control the protect coat of concrete.
2.Improving working efficiency: can save workers 50% and save construction time by 50%-70%.
3.Enhancement of Anti-Cracking of concrete: crack reduction by more than 75%.
4.Saving wire rods: can save wire rods by over than 25% the traditional bundled steel bar.
5.Cut-Down of Cost: Decrease project cost.
Properties of products:
Item | HRB335Hot-rolled | HRB400Hot-rolled | CRB550Cold-rolled |
Tensile strengthMpa | ≥490 | ≥570 | ≥550 |
Yield strengthMpa | ≥335 | ≥400 | ≥500 |
Elongation% | ≥16 | ≥14 | ≥8 |
Designed strengthN/mm2 | 300 | 360 | 360 |
Shearing forceN | ≥150×As | ≥150×As | ≥150×As |
Elasticity ValueN/mm2 | 2.0×105 | 2.0×105 | 2.0×105 |
Technocal Standard
Welded steel fabric for the reinforcement of concreteGB/T1499.3-2002
Technical Specification for Concrete Structures Reinforced with Welded Steel FabricJGJ/T114-2003.J276-2003
Hot rolled ribbed steel bars for the reinforcement of concreteGB1499-98
Cold rolled ribbed steel barsGB13788-9
Scope of application:
Welded mesh can be used in the multi-storey and high commercial building, airplane runway, road, and tunnel. Bridge, concrete pipes, waterdyke, dock, storage and sewage farm and so on.
Type of products:
There are two type of mesh made by our company:
Stands mesh:
Line wire diameter (nominal) 4.0 - 14.0 mm
Cross wire diameter (nominal) 4.0 14.0 mm
Line wire spacing 100 / 150 / 200 /250/ 300 /350/ 400 mm
Cross wire spacing 100 / 150 / 200 / 300 / 400 mm
Other and larger cross wire spacing freely programmable
Wire mesh length 2000 - 6000 mm
Wire mesh width 2000 3300 mm
Non-Stands mesh:
Line wire diameter (nominal) 4.0 - 14.0 mm
Cross wire diameter (nominal) 4.0 14.0 mm
Line wire spacing min. 100 mm
larger line wire spacing in steps of 50 mm
larger line wire spacing in steps of 50 mm
Cross wire spacing min 25mm
above programmable in increments of 0.1 mm.
Wire mesh length: 2000 - 14000 mm
Wire mesh width: 1100 3300 mm
BXM can produce not only the mesh according to the national standard of Welded steel fabric for the reinforcement of concreteGB/T1499.3-2002 but also the products compliance with the AS/NZS 4671:2001 (Australian and New Zealand standard), BS4483 (English standard), DIN488 (Germany standard), SIA 16211 S 550(Switzerland standard) and NFA35-016 (France standard) etc.
welded mesh
Send your message to this supplier
Other Products from this Supplier
See more
welded mesh, wire mesh panel, mesh sheet products from this supplier.
Didn't find what you're looking for? Post a buying lead.
Products
- construction mesh [14]
- welded mesh panels [11]
- welded wire mesh [28]
- welded steel mesh series [4]
Company Info
Tianjin Lian-an Welded Steel Fabric Technology Co., Ltd.
[China (Mainland)]
[Verified Member]
City: tianjin
Province/State: Tianjin
Country/Region : China (Mainland)
Business Type:Manufacturer
Online Postings: Products